1620: Spider X Backpacker Kit v3
The Spider X Backpacker Kit v3 is a versatile, photographer-focused carrying solution that allows you to comfortably carry your camera from either your belt or backpack strap.
The Spider X securely clips onto any belt, or inserted into the Spider Backpack Adapter
The best part? This change can be done in seconds!
COMPATIBILITY NOTICE: This product is not compatible with Spider v2 gear.
DESCRIPTION
The Spider X Accessory Holster v3 is a versatile, multi-use carrying system that allows you to carry photography gear such as an off camera flash, light tube, gimbal, selfie stick, binoculars and more!
The Spider X securely clips onto any belt, or inserted into the Spider Backpack Adapter
The best part? This change can be done in seconds!
Spider X Camera Holster v3
The Spider Accessory Holster v3 clips directly to our Spider Belt or any other belt and allows for quick-draw access of your ≤5lb. camera and other photography gear such as an off camera flash, light tube, gimbal, selfie stick, binoculars and more!
Built to withstand years of heavy use without compromise, the body of the Spider X Holster is made from a wear resistant carbon fiber resin and has a strong spring steel clip.
The holster features a dual-position locking system designed to give you total control over your workflow:
Position 1: Auto-Lock Mode – As soon as a Spider v3 Plate Pin or other Spider v3 Accessory is inserted, the holster lock automatically engages, securing your camera. To release, lift the lever and remove your camera. The holster will return to its Auto-Lock Mode.
Position 2: Quick-Draw Mode – Push the lever upward until it “clicks” into place, and the holster remains open for quick-draw access. When you’re ready for maximum security again, simply push the lever back down to re-engage the Auto-Lock Mode.
Spider Backpack Adapter
The Backpack Adapter fastens to your backpack's strap, or the front of the Adapter can be looped through any casual belt. The camera pad on the Backpack Adapter has an elastic velcro strap, this is used to secure the camera lens when not in use, preventing excessive camera bounce while also protecting against scuffing.
- The Spider X holster can also be removed from the adapter and fastened to any belt for use on the hip. You can also use the entire Backpacker kit with any belt.
- The Backpack Adapter is compatible with SpiderLight or Spider X Camera Holsters and allows you to easily and securely clip your holster into the Backpack Adapter.
Spider Camera Plate v3
The Spider Camera Plate v3 attaches to your DSLR or Mirrorless camera using the camera's 1/4"- 20 tripod mount.
It features laser engraved center marking for accurate alignment with anti-slip rubber pads on the bottom for a stable, secure install, and also features our stainless steel Spider Anti-Twist Pin v3
The adjustment Hex wrench for the plate's attachment screw is installed directly inside the Spider Plate for convenient access!
The (2) built-in 1/4"x20 mounts allow you to attach your tripod plate / quick release into. This eliminates the need to take our plate off to attach your gear!
Spider Camera Plate v3 (Micro Plate)
The Spider Plate has a removable top section called the “Micro Plate”, which can be installed all by itself as an Arca Swiss compatible tripod plate.
The Micro Plate section also has an integrated Stainless Steel QD (quick disconnect) socket which is compatible with all standard QD swivels, such as the ones on our Spider Shoulder Harness System.
This Micro Plate section is directly compatible with our Spider Backpack Adapter* without the need for a Spider Camera Holster and can be inserted as is. (*not included)
When using one of our SpiderPro Hand Strap v2, the Micro Plate Slider features a dedicated passthrough and mounting point for the Spider Handstrap. This allows for uninterrupted contact of the plate to the camera body, providing unmatched stability.
Spider Plate Pin v3
Made from CNC stainless steel, the SpiderPro Plate Pin v3 is specifically for use on the v3 Spider Plates and eliminates the issues with threaded pins, such as becoming unthreaded over time.
We do not recommend removing the Spider Pin unless it becomes damaged and needs to be replaced.
- The Spider Anti-Twist Pin on this camera plate is pre-installed with threadlocker to ensure a secure hold.
COMPATIBILITY NOTICE: This product is not compatible with Spider v2 gear.
WHAT'S IN THE BOX
1 x Spider X Accessory Holster v3
1 x Spider Backpack Adapter
1 x Spider Camera Plate v3
SPECS
Dimensions:
-
Weight:
0.46 lbs. (210 g)
SKU:
1620
Barcode:
850059604557
SUPPORT
View Setup Videos + Downloadale Instructions for this product -- (CLICK HERE)
Still have questions?
Send our Customer Support and email at hello@spiderholster.com , or by visiting our Contact Us Page
The Spider X Accessory Holster v3 is a versatile, multi-use carrying system that allows you to carry photography gear such as an off camera flash, light tube, gimbal, selfie stick, binoculars and more!
The Spider X securely clips onto any belt, or inserted into the Spider Backpack Adapter
The best part? This change can be done in seconds!
Spider X Camera Holster v3
The Spider Accessory Holster v3 clips directly to our Spider Belt or any other belt and allows for quick-draw access of your ≤5lb. camera and other photography gear such as an off camera flash, light tube, gimbal, selfie stick, binoculars and more!
Built to withstand years of heavy use without compromise, the body of the Spider X Holster is made from a wear resistant carbon fiber resin and has a strong spring steel clip.
The holster features a dual-position locking system designed to give you total control over your workflow:
Position 1: Auto-Lock Mode – As soon as a Spider v3 Plate Pin or other Spider v3 Accessory is inserted, the holster lock automatically engages, securing your camera. To release, lift the lever and remove your camera. The holster will return to its Auto-Lock Mode.
Position 2: Quick-Draw Mode – Push the lever upward until it “clicks” into place, and the holster remains open for quick-draw access. When you’re ready for maximum security again, simply push the lever back down to re-engage the Auto-Lock Mode.
Spider Backpack Adapter
The Backpack Adapter fastens to your backpack's strap, or the front of the Adapter can be looped through any casual belt. The camera pad on the Backpack Adapter has an elastic velcro strap, this is used to secure the camera lens when not in use, preventing excessive camera bounce while also protecting against scuffing.
- The Spider X holster can also be removed from the adapter and fastened to any belt for use on the hip. You can also use the entire Backpacker kit with any belt.
- The Backpack Adapter is compatible with SpiderLight or Spider X Camera Holsters and allows you to easily and securely clip your holster into the Backpack Adapter.
Spider Camera Plate v3
The Spider Camera Plate v3 attaches to your DSLR or Mirrorless camera using the camera's 1/4"- 20 tripod mount.
It features laser engraved center marking for accurate alignment with anti-slip rubber pads on the bottom for a stable, secure install, and also features our stainless steel Spider Anti-Twist Pin v3
The adjustment Hex wrench for the plate's attachment screw is installed directly inside the Spider Plate for convenient access!
The (2) built-in 1/4"x20 mounts allow you to attach your tripod plate / quick release into. This eliminates the need to take our plate off to attach your gear!
Spider Camera Plate v3 (Micro Plate)
The Spider Plate has a removable top section called the “Micro Plate”, which can be installed all by itself as an Arca Swiss compatible tripod plate.
The Micro Plate section also has an integrated Stainless Steel QD (quick disconnect) socket which is compatible with all standard QD swivels, such as the ones on our Spider Shoulder Harness System.
This Micro Plate section is directly compatible with our Spider Backpack Adapter* without the need for a Spider Camera Holster and can be inserted as is. (*not included)
When using one of our SpiderPro Hand Strap v2, the Micro Plate Slider features a dedicated passthrough and mounting point for the Spider Handstrap. This allows for uninterrupted contact of the plate to the camera body, providing unmatched stability.
Spider Plate Pin v3
Made from CNC stainless steel, the SpiderPro Plate Pin v3 is specifically for use on the v3 Spider Plates and eliminates the issues with threaded pins, such as becoming unthreaded over time.
We do not recommend removing the Spider Pin unless it becomes damaged and needs to be replaced.
- The Spider Anti-Twist Pin on this camera plate is pre-installed with threadlocker to ensure a secure hold.
COMPATIBILITY NOTICE: This product is not compatible with Spider v2 gear.
1 x Spider X Accessory Holster v3
1 x Spider Backpack Adapter
1 x Spider Camera Plate v3
Dimensions:
-
Weight:
0.46 lbs. (210 g)
SKU:
1620
Barcode:
850059604557
View Setup Videos + Downloadale Instructions for this product -- (CLICK HERE)
Still have questions?
Send our Customer Support and email at hello@spiderholster.com , or by visiting our Contact Us Page
